Steel 1-3/8" Diameter Gravity Roller Conveyor
Photo's, Video's, & Dimensions
Equipment Downloads
Related Items
Model #:
SSR-15-6-5-HYT
Recalculating...
Overall Length
Overall Width
Roller Centers
Equipment Options
Base Price: $67.36
ColorEdit
$0.00Green Non-Standard colors may change lead time to 1 week delivery.
Floor Support HeightEdit$97.4826-3/4" to 38-3/4" (Quantity: 2) Adjustable floor supports with a height range of 26-3/4" to 38-3/4" to top of conveyor elevation.
Note: Floor Support quantities are determined automatically using the industry standard calculation of 1 support per 10 ft. in length plus 1. However, you may change the quantity in the Shopping Cart based on your specific application.Guard RailsEdit$0.00No Guard Rail Height - DischargeEdit$0.0030" Conveyor elevation to the top of the belt is 30".
Height - InfeedEdit$0.0030" Conveyor elevation to the top of the belt is 30".
Package StopsEdit$0.00None Angle End Stop Assembly - 15" Overall Width $16.99
15" Overall Width, 1.5" x 1.5" x 12 gauge powder painted steel
Price: $67.36
Shipping Weight: 30 lbs.
Shipping Estimate: $25.89 each
Specifications
| Overall Length |
5 ft. |
| Overall Width |
15 in. |
| Frame Capacity |
250 lbs. Maximum Distributed Load Capacity Per Foot with 5 ' Support Centers, 31 lbs. Maximum Distributed Load Capacity Per Foot with 10 ' Support Centers |
| Capacity |
45 lbs. maximum load per roller |
| Roller Centers |
6 in. |
| Axles |
.25 inch diameter, round |
| Finish |
Powder Painted Green |
| Frame |
2.5 inches deep x 1 inch flange x12 guage formed steel |
| Couplings |
Bolts on end, hooks on opposite end. |
| Rollers |
1-3/8 inch diameter x 18 gauge galvanized steel. The spring loaded axle allows the roller to easily be removed or inserted |
Description
This Steel 1-3/8” Diameter Gravity Roller Conveyor is perfect for conveying light product in a permanently or temporary installed situation. The 1-3/8” diameter rollers are constructed with 18 gauge galvanized steel giving this conveyor a capacity equal to 45 lbs per roller. The rollers can be placed on 1.5”, 3”, 4.5”, 6”, 9”, or 12” centers depending on the type of application needed. Smaller or irregular shaped products tend to convey well with small roller spacing. The overall conveyor capacity increases as the roller center spacing decreases. The galvanized coated rollers provide a form of rust prevention so that it can be used in less than ideal environments where wet products might be found. Just as a rule of thumb when selecting roller spacing, a minimum of three rollers under the product being conveyed is suggested.
Guarantee
Hytrol Conveyor Company, Inc. warrants that goods sold by Hytrol and shipped on or after January 1, 2003 will be free from defects in material and workmanship for a period of one year from date of shipment, or 4,200 hours of operation, whichever occurs first. Hytrol’s sole obligation under this warranty shall be to repair or replace, at Hytrol’s option, FOB-Jonesboro, AR, any part or goods proving defective within the terms and period of this warranty. Buyer must provide Hytrol immediate written notice of the claimed defect, including a description of the goods, the defect, and the date of its discovery. Hytrol reserves the right to inspect the part or goods at the buyer’s location. Buyer shall bear responsibility for the cost of labor and other charges for removal of defective part or goods