26" Wide, 45 Degree Minimum Pressure V-belt Straight Spur- 1.9" Rollers
Photo's, Video's, & Dimensions
Equipment Downloads
Related Items
Model #: 190LRSS-23-26-45-HYT
Equipment Options
Base Price: $2,251.18
ColorEdit
$0.00 Non-Standard colors may change lead time to 1 week delivery.
Conveyor SpeedEdit$0.0065 Feet Per Minute Speed of 65 Feet Per Minute (FPM). The speed of the conveyor and total distributed load may affect the necessary horsepower of the motor
Floor Support HeightEdit$101.3230-1/2" to 42-1/2" (Quantity: 2) Adjustable floor supports with a height range of 30-1/2" to 42-1/2" to top of conveyor elevation.
Note: Floor Support quantities are determined automatically using the industry standard calculation of 1 support per 10 ft. in length plus 1. However, you may change the quantity in the Shopping Cart based on your specific application.
Guard RailsEdit$0.00No Guard Rail Height - DischargeEdit$0.00 Height - InfeedEdit$0.00 MotorEdit$0.001/2 HP 200/208V - 3 Ph. - 60 Hz 1/2 HP, 200 Volt, 3 Phase, 60 Hz, motor with a totally enclosed C-face.
Spur Flow - SideEdit$0.00Spur Flow - Left Hand Spur Flow - TypeEdit$0.00Spur Flow - Converging
Price: $2,251.18
Shipping Weight: 191 lbs.
Shipping Estimate: $127.32 each
Specifications
| Overall Width |
26 in. |
| Bed Width |
23 in. |
| Capacity |
500 lbs. |
| Speed Reduction |
Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive sheave. |
| Standard Speed |
65 |
| Spur Angle |
45 deg. |
Description
This minimum pressure spur features 1.9” diameter rollers which are driven by a v-belt that allows 2% product back pressure. This low back pressure allows product to accumulate back-to-back without exerting a large amount of weight on each other. This spur offers the option to be “slave-driven” by a section of straight conveyor with an end-mounted drive. The rollers feature large bearings that allow for higher attainable carton flow rates and future expansion.
The minimum pressure V-belt spur is mainly used to merge straight sections of conveyors together that might be coming or going to case pack, empty box return, or picks areas found within warehousing applications. This section of conveyor comes as a 30 or 45 degree angle and can be left or right handed, to function as a take-away or induction conveyor. Because of these features, this spur is often used in conjunction with sortation technology to provide a path away or to the main sorting line. Similar sized product travels very well with minimum product orientation loss. This spur can primarily be found in food, bottling, canning, and retail industries where medium to large cartons are used.
Additional Options
- Side Mounted Center Drive
- Low Elevation Side Mounted Center Drive
- V-Belt Drive
- O-Ring Drive Chain
- Package Stops
- Plows
- Guard Rails
- Roller Centers
- Motors
- Poly-Tier Supports
- Ceiling Hangers
- Electrical Controls
Guarantee
Hytrol Conveyor Company, Inc. warrants that goods sold by Hytrol and shipped on or after January 1, 2003 will be free from defects in material and workmanship for a period of one year from date of shipment, or 4,200 hours of operation, whichever occurs first. Hytrol’s sole obligation under this warranty shall be to repair or replace, at Hytrol’s option, FOB-Jonesboro, AR, any part or goods proving defective within the terms and period of this warranty. Buyer must provide Hytrol immediate written notice of the claimed defect, including a description of the goods, the defect, and the date of its discovery. Hytrol reserves the right to inspect the part or goods at the buyer’s location. Buyer shall bear responsibility for the cost of labor and other charges for removal of defective part or goods